close
Choose Your Site
Global
Social Media
| Quantity: | |
|---|---|
150x50x8
Wangzu
Product introduction
Plastic formwork is an energy-saving and environmentally friendly product. It is a new type of replacement product following wooden formwork, combined steel formwork, bamboo-wood laminated formwork and full steel large formwork. It can completely replace traditional steel formwork, wooden formwork and square timber, and is energy-saving and environmentally friendly with low amortization cost. The turnover times of plastic formwork can reach over 30 times and it can be recycled and remade. It has a wide range of temperature adaptability and strong specification adaptability. It can be sawn and drilled, and is convenient to use. The flatness and smoothness of the formwork surface exceed the technical requirements of the existing plain concrete formwork. It has flame-retardant, anti-corrosion, water-resistant and anti-corrosion functions of chemicals, and has good mechanical properties and electrical insulation performance. It can meet the requirements of various rectangular, cubic, L-shaped and U-shaped building formwork.
Product Advantage
1. Economic efficiency and significant cost reduction
The outstanding advantage of plastic formwork lies in its high turnover rate. Under normal use, it can be recycled 50 to 100 times, which is 10 times that of wooden formwork and 5 to 8 times that of bamboo plywood. Its lightweight feature (only 1/5 the weight of steel formwork) makes it possible to transport and install without relying on large equipment. One worker can handle it, significantly reducing labor costs. Calculated over the entire life cycle, its allocated cost per square meter can be less than 1 yuan, with significant long-term economic benefits.
Second, the construction is convenient and efficiency is greatly improved. The plastic formwork adopts a modular and snap-on connection design, achieving a "foolproof" assembly. No iron nails are needed, and ordinary workers can quickly complete the installation, changing the labor structure and saving time and costs. Secondly, its surface is smooth and flat, with good demolding properties. After pouring, no demolding agent needs to be applied, and the formwork can be removed by light tapping. The disassembly and assembly time of a single formwork can be shortened to one-third of that of traditional formwork. The hollow structure design has strong anti-deformation ability, which can reduce the reinforcement process and achieve large-scale one-time pouring. For example, in the construction of high-rise building walls, the progress of "one floor per day" can be achieved, shortening the construction period by 20% to 30% compared with traditional wooden formwork.
2. Excellent Performance, Ensuring Project Quality
The plastic formwork has stable material properties and will not expand or contract due to changes in temperature and humidity, effectively avoiding the deformation, delamination, and cracking issues commonly found in traditional formwork. Its excellent forming quality ensures that the concrete surface can achieve the effect of a decorative clear water wall, eliminating defects such as honeycombing and pitting, and reducing the cost of subsequent repairs.
In addition, it is resistant to corrosion and moisture, and can maintain stable performance in extreme environments ranging from -30℃ to 70℃, making it suitable for a variety of complex engineering scenarios.
3.
Fourth, green and environmentally friendly, in line with sustainable development. The production of plastic formwork does not require the felling of trees and does not use toxic chemical adhesives, with no waste gas or wastewater emissions. 1. During use, it does not produce construction waste such as wood chips or waste glue, and can be completely recycled and reused, achieving a "zero waste" cycle, which is in line with the concept of green buildings.
4. Wide Application and Strong Adaptability
Plastic formwork can be customized in different thicknesses and sizes, and can be adapted to irregular components through cutting, drilling, and other methods. It is widely used in various construction projects such as residential buildings, office buildings, shopping malls, stations, factories, water conservancy, bridges, and tunnels.
Technical Parameters
| Model | Adjustable formwork panel |
| Material | PP/ABS |
| Shape | Single/double |
| Size | Customized |
| Standard feature | Adjustable assembly |
| Quality Control | We have QC system and record all production process for your review |
Product Use
FAQ
Q1: Are you a trading company or a manufacturer?
A: We are a dedicated manufacturing factory.
Q2: What services do you offer?
A: We specialize in the innovative design and robust manufacturing of formwork and scaffolding solutions. These are pivotal in the construction of concrete structures across a variety of projects, including residential properties, multi-level complexes, towering skyscrapers, elegant towers, expansive sports stadiums, intricate bridges, hydropower units, and diverse industrial structures.
Q3: How can we assist you?
A: We provide expert advice, meticulous formwork layout plans, and comprehensive cost estimations to stakeholders such as project owners, architectural design institutes, and construction contractors.
B: Our products are available for purchase by contractors, construction companies, material suppliers, and trading entities.
C: We extend support to our global partners with our high-quality formwork and scaffolding products.
D: We offer both remote and on-site guidance to construction teams to ensure flawless execution.
Q4: Can you provide samples? Are they complimentary?
A: Absolutely, we offer complimentary samples; however, the cost of freight is not included.
Q5: What information is required to draft a preliminary design and quotation for a construction project?
A: We need the structural and sectional drawings.
Q6: How long does it generally take to formulate a brief design and quotation once we provide the structural drawings?
A: Typically, it requires about 5 to 7 days, contingent upon the specific needs of the construction project.
Q7: What is the estimated timeframe for manufacturing the products after the contract is signed?
A: Generally, the production period ranges from 30 to 60 days, depending on the type and volume of products ordered.
Q8: Could you explain your payment terms?
A: For payments up to 1000 USD, full payment is required in advance. For payments exceeding 1000 USD, a 30% T/T deposit is necessary, with the remaining balance due before shipment.
Product introduction
Plastic formwork is an energy-saving and environmentally friendly product. It is a new type of replacement product following wooden formwork, combined steel formwork, bamboo-wood laminated formwork and full steel large formwork. It can completely replace traditional steel formwork, wooden formwork and square timber, and is energy-saving and environmentally friendly with low amortization cost. The turnover times of plastic formwork can reach over 30 times and it can be recycled and remade. It has a wide range of temperature adaptability and strong specification adaptability. It can be sawn and drilled, and is convenient to use. The flatness and smoothness of the formwork surface exceed the technical requirements of the existing plain concrete formwork. It has flame-retardant, anti-corrosion, water-resistant and anti-corrosion functions of chemicals, and has good mechanical properties and electrical insulation performance. It can meet the requirements of various rectangular, cubic, L-shaped and U-shaped building formwork.
Product Advantage
1. Economic efficiency and significant cost reduction
The outstanding advantage of plastic formwork lies in its high turnover rate. Under normal use, it can be recycled 50 to 100 times, which is 10 times that of wooden formwork and 5 to 8 times that of bamboo plywood. Its lightweight feature (only 1/5 the weight of steel formwork) makes it possible to transport and install without relying on large equipment. One worker can handle it, significantly reducing labor costs. Calculated over the entire life cycle, its allocated cost per square meter can be less than 1 yuan, with significant long-term economic benefits.
Second, the construction is convenient and efficiency is greatly improved. The plastic formwork adopts a modular and snap-on connection design, achieving a "foolproof" assembly. No iron nails are needed, and ordinary workers can quickly complete the installation, changing the labor structure and saving time and costs. Secondly, its surface is smooth and flat, with good demolding properties. After pouring, no demolding agent needs to be applied, and the formwork can be removed by light tapping. The disassembly and assembly time of a single formwork can be shortened to one-third of that of traditional formwork. The hollow structure design has strong anti-deformation ability, which can reduce the reinforcement process and achieve large-scale one-time pouring. For example, in the construction of high-rise building walls, the progress of "one floor per day" can be achieved, shortening the construction period by 20% to 30% compared with traditional wooden formwork.
2. Excellent Performance, Ensuring Project Quality
The plastic formwork has stable material properties and will not expand or contract due to changes in temperature and humidity, effectively avoiding the deformation, delamination, and cracking issues commonly found in traditional formwork. Its excellent forming quality ensures that the concrete surface can achieve the effect of a decorative clear water wall, eliminating defects such as honeycombing and pitting, and reducing the cost of subsequent repairs.
In addition, it is resistant to corrosion and moisture, and can maintain stable performance in extreme environments ranging from -30℃ to 70℃, making it suitable for a variety of complex engineering scenarios.
3.
Fourth, green and environmentally friendly, in line with sustainable development. The production of plastic formwork does not require the felling of trees and does not use toxic chemical adhesives, with no waste gas or wastewater emissions. 1. During use, it does not produce construction waste such as wood chips or waste glue, and can be completely recycled and reused, achieving a "zero waste" cycle, which is in line with the concept of green buildings.
4. Wide Application and Strong Adaptability
Plastic formwork can be customized in different thicknesses and sizes, and can be adapted to irregular components through cutting, drilling, and other methods. It is widely used in various construction projects such as residential buildings, office buildings, shopping malls, stations, factories, water conservancy, bridges, and tunnels.
Technical Parameters
| Model | Adjustable formwork panel |
| Material | PP/ABS |
| Shape | Single/double |
| Size | Customized |
| Standard feature | Adjustable assembly |
| Quality Control | We have QC system and record all production process for your review |
Product Use
FAQ
Q1: Are you a trading company or a manufacturer?
A: We are a dedicated manufacturing factory.
Q2: What services do you offer?
A: We specialize in the innovative design and robust manufacturing of formwork and scaffolding solutions. These are pivotal in the construction of concrete structures across a variety of projects, including residential properties, multi-level complexes, towering skyscrapers, elegant towers, expansive sports stadiums, intricate bridges, hydropower units, and diverse industrial structures.
Q3: How can we assist you?
A: We provide expert advice, meticulous formwork layout plans, and comprehensive cost estimations to stakeholders such as project owners, architectural design institutes, and construction contractors.
B: Our products are available for purchase by contractors, construction companies, material suppliers, and trading entities.
C: We extend support to our global partners with our high-quality formwork and scaffolding products.
D: We offer both remote and on-site guidance to construction teams to ensure flawless execution.
Q4: Can you provide samples? Are they complimentary?
A: Absolutely, we offer complimentary samples; however, the cost of freight is not included.
Q5: What information is required to draft a preliminary design and quotation for a construction project?
A: We need the structural and sectional drawings.
Q6: How long does it generally take to formulate a brief design and quotation once we provide the structural drawings?
A: Typically, it requires about 5 to 7 days, contingent upon the specific needs of the construction project.
Q7: What is the estimated timeframe for manufacturing the products after the contract is signed?
A: Generally, the production period ranges from 30 to 60 days, depending on the type and volume of products ordered.
Q8: Could you explain your payment terms?
A: For payments up to 1000 USD, full payment is required in advance. For payments exceeding 1000 USD, a 30% T/T deposit is necessary, with the remaining balance due before shipment.
