close
Choose Your Site
Global
Social Media
The roadside stone plastic mould is a kind of injection mould model used for the production of cement precast roadside stone, mainly using engineering polypropylene injection molding. This injection mold for plastic will be applied by pouring concrete into the mold floor tile, after the cement solidified to remove the mold or mold molding, and finally get the roadside stone.
Material and manufacturing process
Engineering polypropylene (PP) is usually used as the raw material. This material has the characteristics of non-toxic, tasteless, low density, high strength, good stiffness, high hardness, strong heat resistance, etc. It can be used at about 100 degrees, and has good electrical properties and high frequency insulation, which is not affected by humidity. In the manufacturing process, the raw materials are completed by quantitative feeding, melting plasticizing, pressure injection, mold filling cooling, mold mould lifting and other steps.Finally,we will get the construction tile mold.And it will be in Plastic Injection Floor Tile Mold Bulkbuy.
Application scenarios and advantages
Roadside stone plastic molds are widely used in a variety of environments, including environmental protection factories and transportation industries. Its structure is simple, beautiful and durable, and the hardness of the roadside stone produced is not worse than the marble roadside stone in the past. In addition, compared to traditional metal or cement molds, plastic molds are lighter, easier to handle and construct, and have better durability and corrosion resistance.
Company Profile
Our company is a professional modular plastic formwork manufacturer,it was founded in 2003 and has 80 workers,covers 50000 square meters.It is located in Jiaxing that is near to Shanghai.
Our main product is plastic mould,we also have highway mould,high speed railway mould,slope protection mould,plastic turnover box and so on.There are more than 10 sets of small injection moulding machines ranging from 300 to 50000 grams, with a strong production and supply capacity.
Our factory has own mould research and development center.You can customize what you need.
We have achieved a lot of reputation,such as HI-TECH enterprises and SMEs IN Specialised New Sectors.Molds of the company have been widely and successfully used in many national key projects in China, and have been well received. In addition, our plastic molds have been sold overseas and have been successfully applied in railway construction projects in Kenya, Ethiopia, Vietnam.
FAQ
Q1.Are you a factory or trading company?
A1:We are a factory.
Q2.How can I get your quotation?
A2.You can send us your project structural drawing or the material list for a quotation. Our engineer team will give your formwork solution.
Q3.What is the Payment term?
A3:T/T or L/C at sight. 30% Deposit for start the production ,the balance before the shipment when goods are ready.
Q4.How long is our Production leading time?
A4:within 15-20 days upon receive deposit in normal season, and 25-30days in our busy time(August,September,October).
Q5.What is the package method?
A5:Our products are usually packed in bulk and on pallets which suits to container transportation.
Q6: Do you have any guarantee on the quality?
A6:We guarantee the quality of different products. If necessary, you can arrange a third-party company to inspect the product quality in our factory.
Q7: What benefits can you offer us?
A7:We can provide you with perfect service, including design, production, delivery and after-sales, good product quality and reasonable price.
Q8: Are you looking for agent or distributor in our country?
A8:Yes, we are looking for an agent or distributor worldwide based on a win-win relationship.
Q9.What is the Trade Term?
A9:Ex-work factory , FOB Shanghai, FOB Ningbo.
The roadside stone plastic mould is a kind of injection mould model used for the production of cement precast roadside stone, mainly using engineering polypropylene injection molding. This injection mold for plastic will be applied by pouring concrete into the mold floor tile, after the cement solidified to remove the mold or mold molding, and finally get the roadside stone.
Material and manufacturing process
Engineering polypropylene (PP) is usually used as the raw material. This material has the characteristics of non-toxic, tasteless, low density, high strength, good stiffness, high hardness, strong heat resistance, etc. It can be used at about 100 degrees, and has good electrical properties and high frequency insulation, which is not affected by humidity. In the manufacturing process, the raw materials are completed by quantitative feeding, melting plasticizing, pressure injection, mold filling cooling, mold mould lifting and other steps.Finally,we will get the construction tile mold.And it will be in Plastic Injection Floor Tile Mold Bulkbuy.
Application scenarios and advantages
Roadside stone plastic molds are widely used in a variety of environments, including environmental protection factories and transportation industries. Its structure is simple, beautiful and durable, and the hardness of the roadside stone produced is not worse than the marble roadside stone in the past. In addition, compared to traditional metal or cement molds, plastic molds are lighter, easier to handle and construct, and have better durability and corrosion resistance.
Company Profile
Our company is a professional modular plastic formwork manufacturer,it was founded in 2003 and has 80 workers,covers 50000 square meters.It is located in Jiaxing that is near to Shanghai.
Our main product is plastic mould,we also have highway mould,high speed railway mould,slope protection mould,plastic turnover box and so on.There are more than 10 sets of small injection moulding machines ranging from 300 to 50000 grams, with a strong production and supply capacity.
Our factory has own mould research and development center.You can customize what you need.
We have achieved a lot of reputation,such as HI-TECH enterprises and SMEs IN Specialised New Sectors.Molds of the company have been widely and successfully used in many national key projects in China, and have been well received. In addition, our plastic molds have been sold overseas and have been successfully applied in railway construction projects in Kenya, Ethiopia, Vietnam.
FAQ
Q1.Are you a factory or trading company?
A1:We are a factory.
Q2.How can I get your quotation?
A2.You can send us your project structural drawing or the material list for a quotation. Our engineer team will give your formwork solution.
Q3.What is the Payment term?
A3:T/T or L/C at sight. 30% Deposit for start the production ,the balance before the shipment when goods are ready.
Q4.How long is our Production leading time?
A4:within 15-20 days upon receive deposit in normal season, and 25-30days in our busy time(August,September,October).
Q5.What is the package method?
A5:Our products are usually packed in bulk and on pallets which suits to container transportation.
Q6: Do you have any guarantee on the quality?
A6:We guarantee the quality of different products. If necessary, you can arrange a third-party company to inspect the product quality in our factory.
Q7: What benefits can you offer us?
A7:We can provide you with perfect service, including design, production, delivery and after-sales, good product quality and reasonable price.
Q8: Are you looking for agent or distributor in our country?
A8:Yes, we are looking for an agent or distributor worldwide based on a win-win relationship.
Q9.What is the Trade Term?
A9:Ex-work factory , FOB Shanghai, FOB Ningbo.
